When it comes to outside space, safety is important; keeping strangers out of your back yard, or ensuring the pool area is secure is a big concern for many people. This is why it is essential to have a railing around your outside space. However, so many railings are unsightly, which dissuade people from putting them up. This is why stainless steel wire balustrade are such a good option. Many people struggle to put up their new railings, so to help you out here is a quick guide about installing stainless steel wire balustrade.
Step 1: Before you can begin the installation process, you need to first make sure that your stainless steel wire balustrade adheres to the Australian safety standards. Many people are unaware of these and they do vary depending on your location. So the best way to ensure you understand these regulations is by checking with your local council. Once you know the rules and regulations that you need to follow, you can begin setting up.
Step 2: In order to install your new stainless steel wire balustrade, you will need to have some tools. The tools you need are: spirit level, drill, hacksaw, string line and a pencil. It will slow don’t the process if you don’t have all of these items to hand, so make sure you have everything you need before you begin.
Step 3: Now you have everything you need, you can begin. The first thing you will need to do is to work out how many panels are needed to surround the entire area. Once you have done this, mark the position of each post. Don’t forget that panels fixed to a wall require a top rail bracket. At this point, you should start measuring and adjusting the lengths of the railings. After determining how long each piece needs to be, you can cut the rails to the desired length.
Step 4: The start of the installation process is arguably the most difficult, so it is important to be precise. Any wonkiness will have a negative impact on the rest of the railing. The easiest way to start is at one end, by attaching it to a wall. If you are putting a railing around an area with no walls, simply put up an end post.
Step 5: The second panel will be easier than the first to attach, and you should find that the rails slot together. Brands will differ in terms of how each section attaches, but there should be specific instructions if you are finding it difficult. After you have attached the two sections together, fix in place with tek screws. It is important to ensure that the rail is tightly in place and properly secured to the piece next to it. Make sure that all panels are straight and level; use a spirit level to check this. Keep attaching sections together until you have completely surrounded the area.
Step 6: After you have put all the pieces together, you will need to secure each post to the floor. This is to ensure the railing is stable and won’t fall over. Be mindful that the type of outdoor flooring you have will make a difference in regards to how you attach the railing. The instructions that come with your railings should tell you how to secure the structure to each floor surface.
Step 7: Finally, you will need to fix any corner and end posts, double checking that they are properly secure. Don’t forget that these posts will keep most of the structure in place, so it is important to make sure they are firmly screwed in. After you are certain that they are stable, you are finished, and your new stainless steel wire balustrade should stand the test of time.